0
2008 Ford E-150
The Largest Auto Parts Store in Canada
About us
Feedback
Retrieve Quote
usa ca
Phone: (866) 530-5789 CA
Log In My Account
0 Shopping Cart $0.00
Flash Savings 2008 Ford E-150 Suspension Ball Joint - Front Lower Moog

2008 Ford E-150 Suspension Ball Joint - Front Lower Moog

★★★★☆ 4.7/5 50 ratings
Front Lower Suspension Ball Joint
  • Features:
  • PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
  • ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
  • EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
MOOG K80197 Front Lower Suspension Ball Joint for Ford E-350 Super Duty
Best Price:
$81.02 CAD $97.22 CAD
Inform me when available
BrandMoog
Part #M12K80197
ConditionNew
WarehouseB
PositionFront Lower
UPC080066587400
E-150 Moog Suspension Ball Joint 2008 Ford
Why shop at AutoPartsWAY?
Canadian flag Canadian WarehouseFast shipping from our Canadian warehouse network. Free ShippingOn orders over $100 CAD shipped from the same warehouse. Full WarrantyWarranty details for this brand and warehouse source. Order 24/7Order anytime — our system works 24/7 to get your parts moving fast. 100% Safety & Security- Enjoy 100% safe, secure ordering every time you shop.
Additional Fitment Information:
Vehicle Position
2008 Ford E-150 Front Lower
  • Front Lower Suspension Ball Joint
  • MOOG K80197 Front Lower Suspension Ball Joint for Ford E-350 Super Duty
MOOG produces the complete steering and suspension package making them the ultimate to undercar solutions. MOOG's leading-edge engineering, metallurgy and manufacturing, along with long-lasting, problem-solving performance, have earned the trust of technicians. Through MOOG's broad range of Problem Solver, Asia-Spec and Euro-Spec steering and suspension parts, MOOG offers comprehensive coverage that provides the latest in domestic and foreign applications. No matter what the service occasion, MOOG provides the problem-solving innovation and precise engineering needed to restore like-new steering and handling to today's vehicles.
Some of the most popular MOOG auto parts consist of tie rod ends, control arms, ball joints, stabilizer bar links, strut mounts, coil springs, suspension bushings, steering parts and so much more.


General

Adjustable
No
Cotter Pin Hole
Yes
Greaseable
Yes
Material
Neoprene
Mounting Hardware Included
Yes
Mounting Hole Quantity
0
Mounting Type
Press-in
Part Description
Suspension Ball Joint
Suspension Grade Type
Standard
Information on technical characteristics, the delivery set, the country of manufacture and the appearance of the goods is for reference only and is based on the latest information available at the time of publication.
  1. Verified Customer
    18 Nov, 2018
    This is a good product
  2. Verified Customer
    13 Nov, 2017
    Fit well, installed without incident.
  3. RSnyderJr
    30 Apr, 2015
    A+ - just as advertised - exceeded my expectations - will buy again!
  4. Kent Szpak
    29 Apr, 2015
    Great.
  5. Jeff Emmerich
    25 Apr, 2015
    Perfect
  6. Phil G. Thompson "Family Craftsman"
    25 Apr, 2015
    Installed these on our 2006 Honda Pilot. Beware, you'll need a pretty beefy hydraulic press to remove the old ones and press in the new ones. These ball joints are very well made and have a unique grease system (see the Moog website). I would definitely buy them again.
  7. Dustin Spears
    25 Apr, 2015
    Werks great great shipping speed thanks!!!
  8. Bill
    18 Apr, 2015
    Exact match, easiest ball joint I've ever replaced.
  9. FV
    15 Apr, 2015
    Exceeds OEM quality and made in Japan. Has grease zerk too! DO NOT OVERTIGHTEN (ZERK) AAA+++
  10. susan wright
    08 Apr, 2015
    It fit perfectly
  11. ReDxSiLLy
    07 Apr, 2015
    Make sure you get a ball joint press that will work with the Aspen...the one I rented did not and ended up just pounding the living crap out of it to get it out...not fun, but did the job.TIP: When you install the grease fitting, it works out well it you point it towards the inner front to make it easier to grease.
  12. andrew angelone
    05 Apr, 2015
    quality parts
  13. Scott B.
    04 Apr, 2015
    This ball joint worked great and it was a very reasonable price.
  14. checkoutmuhhat
    02 Apr, 2015
    Great product, exact fit, just be careful putting the dust boot on. I had to press it on and when I took the press off the first time I ripped the boot; couldn't figure out any other way to get it on. I haven't found the boot for sale just by itself so I am now the proud owner of a second UBJ just so I could get the boot (can you do something about that Moog?). Also on the boot it is marked for which side goes on the inside, so keep an eye out for that. Pressing the UBJ in is a huge pain in the butt, so be ready for that. One of the UBJs I ordered was missing the zerk fitting, but I ordered it from the warehouse deals side so I can't blame it on Moog, I guess AutoPartsWAY didn't notice the missing piece when it was returned. Also the zerk fitting is a weird size, went through two different packs of zerks and none of them fit on there. Had the UBJ on for about a month now, did some light offroading, very pleased.
  15. WALTER LEMMON
    31 Mar, 2015
    genuine moog parts. delivered on time
  16. Country Livin
    30 Mar, 2015
    Fit my 97 Forester perfectly.A tip for separating the ball joint from the hub.Loosen and remove the hub thru-bolt that secures the ball joint into the hub. With the car safely on jack stands and supported, jack the control arm up at the ball joint stud. Slip the largest socket that will fit between the widened opening due to jacking the control arm up, between the knuckle and the control arm/ball joint. once the socket is in that recess, lower the jack, the spring tension in the suspension will pop the joint loose and allow you to pry it the rest of the way out.Watch youtube videos for specifics. Using this method these installed in under an hour. They came with new hardware too.Don't skimp on some flybynight chinese import parts. Spend the few extra coins and grab these moog joints.
  17. Hector E. Rodriguez Jr.
    27 Mar, 2015
    Moog.. absolutely the best, just like OEM. Thanks.
  18. ChilnVilan
    27 Mar, 2015
    Exact same part, brand new, great Moog quality at half the price of my local parts store. The install shop had no problems installing.
  19. Sean fritz
    14 Mar, 2015
    So far so good
  20. James E. Moberly
    10 Mar, 2015
    Great product, fit perfectly. I did have a issue with the boot. The upper ball joint boots pressed right on after installing. I used my 60 ton press and a bearing race fixture to press the boot. This lower ball joint boot would not seat at all not matter what I tried. So I ended up putting silicon around it except on the back. That way any excess grease will blow out the back away from the brake disc. The upper ball joint I can understand why it is not pressed on at the factory because the joint is screwed into the upper control arm, then the boot is installed. The lower ball joint does not have that issue so it should be pressed on at the factory. Years ago they were - in the 70s
  21. Osama Ziadeh "orangeG8"
    07 Mar, 2015
    I did 2 months before I sold my envoy and it made the car handle like new. My shocks at this point was about 1 to 2 years old, with less than 10k miles, I would recommend if you have the money to replace this with the shocks. It is also grease-able so you can grease it every year and it will last a lot longer than the non serviceable ball joints.
  22. rudolph m munoz
    06 Mar, 2015
    direct fit easy to install. I have bought this brand before and it has all ways out performed and out lived other after market brands.
  23. Catherine K.
    04 Mar, 2015
    These are the exact fit for my '09 Z71 Colorado, replaced uppers at same time, huge difference (better) in handling, braking, everything. Truck only has 42thou. Miles, but it's a V8 4x4, stock ball joints where pretty tired. You will have to loosen the axle drive nut and pound the axle towards center of truck enough to clear lower ball joint.. Brass drift or large gear puller may have to be used, again just enough to clear lower ball joint, DO Not have to remove axle completely from hub. Plan on replacing all chassis/suspension parts with Moog, I'm that impressed.
  24. palehorse24
    04 Mar, 2015
    Fit my 2004 Ford F150 4x4. Great quality at a terrific price. The zerk fitting is a nice addition to keep it properly lubricated. The removal and installation was not too difficult with my cordless impact wrench and a ball joint removal kit I borrowed from Advance Auto Parts. The impact wrench is a must as it would not have been fun with a regular wrench or ratchet. Highly recommended.
  25. James E. Moberly
    25 Feb, 2015
    Excellent replacement ball joint. I have always used moog ball joints. AutoPartsWAY is a thrifty place to get them.
  26. Pasquale J Gallelli
    18 Feb, 2015
    Great product by Moog...Great price from AutoPartsWAY compared to local automotive supply houses...
  27. DRC
    17 Feb, 2015
    So far so good should last longer than the 18year old OEMs
  28. hardlymoving
    13 Feb, 2015
    Moog is a trusted company that provide high quality parts that fits perfectly. Never had any problems with Moog parts.
  29. Mr. Garcia
    13 Feb, 2015
    Top quality strong durable ball joint... moog is the best.
  30. Alden Brom
    12 Feb, 2015
    Tip for installation on 2002 Civic EX Coupe (other body styles and trim probably the same):The grease fitting with elbow will not clear axle. Remove the nipple valve from the elbow and install that directly onto the ball joint. This will allow you to connect the grease gun and properly grease the ball joint and will clear the axle by a few mm.
  31. erin peterson
    10 Feb, 2015
    i did not need it after all but still saved it for when i need it. well packaged and it was the right product for my vehicle.
  32. Czkrebbs
    09 Feb, 2015
    Perfect fit for my 07 z85 4x4 Chevy Colorado
  33. Adam B.
    09 Feb, 2015
    Exact fit for my 2007 dodge ram 2500 4x4 diesel. Quality Moog product at a fraction of the price of the auto parts store.
  34. 2Yellowdogs "2yellowdogs"
    05 Feb, 2015
    Installed on my 2001 Chevy Lumina. I can only give 3 stars because the first set of ball joints only lasted 25000 miles. I did speak to Moog customer service about this and they will cover the first set on warranty. I will continue using Moog. Hopefully these last longer.
  35. A. Westfall
    26 Jan, 2015
    They pressed right in. I had a harder time getting the 13 year old ones out.Working great 2001 Nissan Xterra
  36. Yote
    12 Jan, 2015
    Boot could be better, can already tell this unit isn't gonna last as long. Probably fine for street cars/trucks, but go genuine toyota parts for offroad rigs.
  37. Cynthia
    06 Jan, 2015
    GOOD
  38. Heather
    29 Dec, 2014
    was exact replacement for my 94 f150 2wd 5.0 xlt. Have been using now for 7 mths and have had no problems or issues with them. The Zerk fittings are a little cheap for my liking but, Zerk's are nothing different that any other brand. The ball joints seemed heavier and better quality than the ones offered at part store. I replaced uppers and lowers on both sides all at once. Shipping was on time and packaging was good too!.
  39. Icky
    16 Dec, 2014
    Great product, I was very satisfied with the quality
  40. McGuivr
    16 Dec, 2014
    I ordered a pair of these. One was made in Japan and had no grease fitting, the other was made in US and did have a grease fitting both seemed like good quality, much better than the AutoZone POS that I replaced twice in 20,000 miles. Be interesting to see if US or Japan lasts longer.
  41. Dig
    13 Dec, 2014
    Very Nice Ball Joint for 2002 Honda Civic LX. For easy install go to AutoZone and use their loan-a-tool program, if you do not own a Hydraulic Press. They have the Manual Press part number 27023 and you will also need the correct adapter kit for your vehicle, also available on the loan a tool program. Check out gear wrench model 3916D for a high quality ball joint separator and changing these out will be painless.
  42. ken padgett
    30 Nov, 2014
    Great item and fit right
  43. AutoPartsWAY Customer
    30 Nov, 2014
    Excellent product
  44. OhBoyTimm
    23 Nov, 2014
    Perfect upgrade for my nissan titan lower ball joint. Can't beat Moog quality. Install fitment was just fine. I am happy it comes with a new pinch bolt. As they should be replaced when ball joints go out.
  45. M. Lee
    19 Nov, 2014
    Work as expected
  46. SHAWN M HAMILTON
    16 Nov, 2014
    Fit perfect
  47. muegenv6
    09 Nov, 2014
    bought this for 2006 honda crv, product looks solid and heavy duty compare to oem but ride feel changed overall to a more truck like than before.
  48. Chloe Stinson
    07 Nov, 2014
    Fit was a bit snug but I blame that on the knuckle, not the ball joint, as size was the same as the old one to my eye. I didn't take the time to mic it since I was able to get it fully seated after cleaning the knuckle mounting area with emery cloth and using some chassis grease to help ease the installation. Replaced the other side with one of these earlier this year and so far it's holding up great, so I ordered the same part for this side.
  49. JLO
    05 Nov, 2014
    Very good product well built has all hardware needed , Recommend to anyone .
  50. Wayne J. Denham
    02 Nov, 2014
    Good price and as described. 4 out of 5 stars only because the product was not packaged well with other items and came open in shipping. Fortunately was able to find the hardware

Loading...