1991 Ford F-350 Door Mirror CIPA

Fit just like my original one.Took 35 minutes to install completly.

It work great!!

Was a perfect fit

It was an exact fit and couldn't be better

It is great to have new side mirror for my toyota tercel.

Excelent.

Fits perfect only problem is that the connector was different. Thank god I had the old one from the old mirrow. Overall A+

Nice fit for the 2005 Envoy XUV, Differs slightly from OEM in that it is missing the the rear retainer clip (not a necessity, open the window prior to install to hold up until you get the nuts on the mounting bolts) and the mirror has the heated mirror icon in the outside upper corner of the glass. Easy to follow videos on youtube to be sure you don't miss a clip or bolt. 10mm socket and a couple extensions, and a putty/pry knife are the only tools you'll need. Handy tip: have a magnet or use tape for the bolt in the deeper pocket of the door panel.

Exact fit as described neat and safe packaging

seen others like this and read the reviews on them and they all said the others rusted. the bracket on this one is solid aluminum so no rust. fits oem, so no drilling. a feature on the bracket that i liked was that it had two placement holes for the mirror head, so if you tow you can set the mirror out farther to accommodate for the blind spots.

I can see these mirror being used in many trail situations. I used it sledding. Is it a perfect, easy, clear view of what is going on behind you? Nope. It's just enough quick information to know if your crew is still behind you and maybe how far back they are. I gave it four starts just because the Velcro strap is a little small over winter gloves. In my case it was a two person process to put it on my wrist. I couldn't slide the glove off with mirror on my wrist, and obviously couldn't put the glove on with the mirror still around the wrist of the glove. That's a minor consideration. Maybe your hands and wrists are smaller.

Works great, Great price!!!

Installed on my 2005 GMC Envoy. Looks and works great. Didn't need the heated mirror, but couldn't beat the price.

Great product! Would buy again and recommend

The driver's side mirror on my 2003 Altima has been broken for years. Cyanoacrylate glue has been working pretty well, but it has broken a couple times. Nissan wanted $176 for the part. I found this one. First, it fits perfectly and looks like the original. It comes packaged in a bag to keep the mirror clean. It has padding on the edges to keep them from getting nicked. The bolts had rubber covers to keep them clean. It has the gasket needed to seal it. I watched a video online to see how to install it. I'm not all that handy but it only took me 15 minutes to swap out the mirror. You will need a 10 mm ratchet to remove and replace.

Mirror Vibrates a little.

Wrong part. Had to return it. Return went without a hitch.

A great item...appears well made and I got two for my John Deere 2025 Tractor (mounted to front end loader arm brackets) They are a great help when backing up (especially when snow blowing), they adjust easily and they are rugged and holding up fine on a tractor that's used for logging. Due to the thickness of the casting mounting hole on the tractor I did need to get longer mounting bolts.

Nice large mirror. Installed it in my Case skid steer. Very solid and you can lock the mirror in position by tightening 3 screws.Also installed the smaller CIPA mirror in the machine. Both are built the same way.

Good price, perfect fit.

Mirrors were as close as I could get to stock mirrors, which are not available. they are fully adjustable and universal. I mounted them just the opposite from picture. They were easy to mount and very universal.. I am pleased with design and quality! Price was so cheap, I did not set my hopes to high. They were perfect for my 280Z.

Perfect fit. 1996 S-10 Blazer (I'm sure it fits a ton of other GM products). Went with the CIPA brand based on overwhelming comments in favor of quality being good. Have been told they are OE to many manufacturers, (Michigan company), based on this product - I believe it to be an exact replacement. Very happy, recommend this brand for sure.

great for the price but still not as quality as the original. a bit shakey while driving but def can still see if there is a car or not

works great, and was a great price.

good

Good mirrors great visibility

Really nice set of mirrors. I bought an 82 El Camino and it had non standard mirrors. These looked close, I took a chance and they screwed right into the existing holes. Nice.. Only had them on for about a week, but so far so good. Price is low enough if I had to replace every year, MP. LOL

I have a CA street legal KTM 525 EXC; in California you have to have minimum one mirror on the left side to be legal on the road.I wanted something that would keep the cops from hassling me yet if I pulled of to a trail I could remove it easily and put it in a back pack so it doesn't get damaged if you spill it in the dirt.The good is that your shoulder is not in the way and you can see everything behind you but the bad is like many of the other reviewers say, everything looks smaller or farther away that it is, I wish they would put a plain mirror instead of this illusion type.Also, it does move a little on you, you will have to adjust it often.Overall for my purpose it works fine.

Good item

It met my needs

This is a very good product, however buyer beware, the listing is for the DRIVER side mirror, not the passenger side. It worked out great for me considering what I really needed was a Driver side mirror.Mirror is in good working condition and is a glossy black color. Everything I was expecting out of a different product I ordered for more than 3 times the price.Definitely recommend if you're looking to replace your Driver side mirror.

Per fit guide this was to fit my 80 RX7....Screw holes did not line up

Exactly as advertised, and prompt delivery

Gracias

I've used other aftermarket mirrors on my 2001 Focus that had poor fit quality. This mirror has an excellent fit and works well. It is a great alternative to the Ford mirror which costs more than twice as much.

Perfect replacement on my "95 class C RV

Everything needed was there to accomplish the repair. Thank you!

The original mirrors on my '89 Bronco II were so loose that they'd blow against the door at 30 mph. These are the same size/shape/color as the OEM but feel a little cheap. They do have a tension adjustment screw on the ball joint allowing a custom stiffness in its movement. They come too tight to move so give it a couple cranks out before installation. Some other reviewers said the screws are lacking but I found them to for perfectly with about 1/3 inch of the shaft inside the nut. The screws are also a Phillips head instead of the original torx head (which had to have the heads drilled off and the shaft removed with vice grips).

Came in two days very quick. I hate tools but this was super easy. My mirror was replaced less than 5 minute.

I used these mirrors on a '53 international harvester I'm restoring. They weren't exactly like the original mirrors but they were a close match. It was easy to install and adjust exactly where I needed them. They are very well built and appear to be durable. The only issue I have is that a 5" mirror is pretty small, making it difficult to see everything behind you. But it does work and it provides the look that I want.

The only thing is, it didn't adjust as far out as my last mirror. But overall, it's a good mirror.

Easy 1 bolt installation. Works well on the passenger side to give you a full view behind but takes some getting used to on the drivers side as the distortion is pretty extreme up close.

I bought 2 of these because they were just too hard to find & expensive here in New Zealand, I live across the other side of the planet from the USA, I was concerned at first they wouldn't arrive, but in 3 weeks they tuned up on my door step & was exactly what I was wanting, A BIG THUMBS UP to the seller for the qwik service & items were just as described in listing, CHEERS AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Most Convex Mirrors are too small to see anything behind you. The shape makes objects look smaller the farther away they are. But this Mirror is large enough to allow viewing objects at a much farther distances behind you. As my wife says "size really does matter"

excelent buy. it,s like buy staff at a garage sale: new merchandise with warrantee noless,for the price of a garage sale bargan

The mirror matches up perfectly and installs easily. There is one problem, the glass is not very stiff, while driving the mirror vibrates making everything very blury. It is much better than the broken one that was hanging on the side of the door. I should have spent the extra money and got the toyota part.

I now can sit in my chair in the den and see who is at the front of the house, FedEx, UPS, kinfolk etc. The angle bracket that came with it allows me to place it on a corner 4 feet high and still adjust it. Oh, and loosen the screws on the back to wiggle it and then tighten back. My chair to mirror is 20 feet, My mirror to area to watch bounces off mirror and goes 30 feet more. This is NOT a cheap made mirror. It's as good a mirror can be. the picture here is the BACKside of the thing with the small bracket (removeable) the front side is Convex (poofed outwards) to see a lot more area. The ridges you see I guess are for strength, but it's solid metal no plastic at all.

This mirror fit my car perfectly and was very ez to install.When it arrived at my house it was loose in the box, the glass of the mirror came out of the housing in transit. It snaps back in easily, but is shaky, feels like it will fall off. Images vibrate when looking in the mirror on the road.

I chose this mirror over other ones because the picture shows it as being black, but the one sent to me was silver, it had the same part number so the picture must be wrong. Other than being the wrong color it was the correct size and did fit on the truck.

I was concerned that this mirror might not match the broken one on my Tercel but it bolted right up and looks like it belongs there!